 |
| ARS working on the original pump before the rebuild was started. |
Email #2:
----- Original Message -----
From: <sales@arsmarine.com>
To: "Tom Blomme"
Sent: Monday, January 21, 2008 9:40 PM
Subject: Re: ARS Quote for pump!
> Tom:
> The boat will perform alot better with a NEW Place diverter over your old
> worn out one, Your old diverter will also not work with a Droop snoot
> because the pins to mount it are horizontal and they need to be vertical.
> I had forgotten about your Diverter control you had in the boat, Thats why
> its hard to quote stuff on the spot. Yes we can use that one, take $215.00
> off the $725.00 = $510.00.
>
> And the Droop does not give you a rooster tail by itself.
> The droop help's lift the boat by lowering the thrust line deeper in the
> water, thus creating more lift on the haul, and when the haul is higher up
> out of the water you get more speed..... Bla Bla Bla...
>
> I'd also recomend that if you want to go with an Aluminum impeller you
> really need to run an inducer, to eliminate any cavitation on holeshot.
> With a bronze or stainless impeller they weight alot more than an
> aluminum,
> and with your H.P. I'm not worried about the cavitation issues on holeshot
> because it will take a split longer for the pump to really start
> turrning....
>
> I'm just looking to build you a Pump and Boat that will last, without
> Breaking parts everyweekend, I've been there!
>> George,
>
>
>> I would like to have the relief valve added in for the 42.95. The boat
>> has a manual diverter and control but may need a new cable-it had a
>> pretty
>> big tail before I just wanted bigger I'm thinking the droop snoot will
>> help
>> for that. If the used bowl will be about as good as the new one I will
>> take
>> the used. As far as the impeller,since I'm not running a shitload of
>> horse
>> I
>> can get by with a new Alum,but the bronze will last much longer and take
>> much more abuse-as long as the used bronze gives me just as much take off
>> and speed as the new Alum I'll take the bronze. If the old diverter and
>> control works the new total would be around $2485 give take a few bucks.
>> If
>> this makes sense let me know. Thanks, Tom
>>
>>
>> ----- Original Message -----
>> From: <sales@arsmarine.com>
>> To: "Tom Blomme"
>> Sent: Monday, January 21, 2008 7:38 PM
>> Subject: ARS Quote for pump!
>>
>>
>>>
>>> Tom:
>>>
>>> $725.00 for the Manual diverter with cable & control.
>>> $249.99 for the Droop snoot
>>> $699.99 for the 2 Piece bowl or $275.00 for a good used one
>>> $499.99 for the shoe and ride plate and all machining to adapt.
>>> $249.99 to pull intake out for machining & reinstall in boat @ proper
>>> angle.
>>> $850.00 Stage 2 Blueprint
>>> $425.00 Good Used Bronze impeller
>>>
>>> total 3,599.96 --- $3,174.97 with used bowl
>>>
>>> Thank You
>>> George Pataki
>>> ARS Marine
>>> (708)449-0200
>>>
>>>
>>>
>>
>>
>>
>
>
> --
> Thank You
> George Pataki
> ARS Marine
> (708)449-0200
>
>
>
No comments:
Post a Comment